Exd and Exe Breather drain plugs now available

Raxton announce the release of the new range of Exd and Exe breather drain plugs.

Raxton Exd Breather Drain Plugs

The Raxton Exd Breather/Drain Plug is designed to:

1) effectively drain moisture from an enclosure,
2) allow air from the enclosure to vent into the surrounding atmosphere thereby minimising moisture build up and
3) provide the explosion proof safety required by a hazardous area environment.

Raxton Exe Breather Drain Plugs

Raxton Exe drain plugs effectively drain any moisture build-up present within the enclosure whilst allowing air in the enclosure to breathe with the surrounding atmosphere minimising moisture build up within the enclosure.

Fastened by means of an allen key the Drain Plug should be fitted at the lowest point of the enclosure.

Read more about Raxton EExe breather drain plugs.

About Raxton

Raxton Limited have been manufacturers of Electrical Thread Adaptors, Reducers, Stopping Plugs and accessories since 1976.

Today Raxton remain committed to products designed to solve the fundamental difficulties which exist due to the variety of thread forms currently in use within the electrical industry.

Problems caused by dissimilar threads can occur in both hazardous and industrial environments.

Certification and approvals
Raxton products are fully approved to meet these requirements, being Exd and Exe certified as ATEX, CSA, IECE and GOST Standards.