EExd Breather drain plugs

The Raxton Exd Breather/Drain Plug is designed to:

1) effectively drain moisture from an enclosure,
2) allow air from the enclosure to vent into the surrounding atmosphere thereby minimising moisture build up and
3) provide the explosionproof safety required by a hazardous area environment.

The Plug is fastened to the lowest point of the enclosure by means of a spanner.

The plug is an assembled item and must not be taken apart at any stage of installation.

The 'O' ring will seal against the enclosure face enhancing the I.P. rating of the Plug.

The Breather/Drain Plug has an impact resistance of 20 Nm and can operate at temperatures between -50°c to 230°c.

Tested to IP66.

Images shown: Type CTA (top) and Type CTE.

Quality
SIRA (0518) 02 ATEX M207
BVQI EN ISO 9001: 2000

Thread specification
Isometric (ISO) to BS3643:1981 and ISO 965 Pts 1 & 3
National Pipe Thread (NPT) to ANSI/ASME:1983

Materials
Brass: BS2874: 1985 CZ121
Stainless Steel: BS970 PT3 316 S11

Approvals
Sira 08ATEX1288U CT Breather Drain
IECEx SIR08.0127U

Plating
Raxton Metallic Drain Plugs are available in a variety of finishes including Nickel, Electro Zinc, Zinc Passivated, Chromatised, Electroless Nickel and Anodised.

Temperature
-50°c to 230°

Part numbering system
The Raxton part numbering system document is available as a 100 KB PDF document.
Click here to download.