You are here > Products  » Exd/Exe Breather Drains

Raxton Exd/Exe Breather Drains

The Raxton Exd/Exe Breather Drain is designed to:

1) effectively drain moisture from an enclosure
2) allow air from the enclosure to vent into the surrounding atmosphere thereby minimising moisture build up
3) provide the explosion proof safety required by a hazardous area environment

EExd breather drain plugsThe Breather Drain is fastened to the lowest point of the enclosure by means of a spanner.

The Breather Drain is an assembled item and must not be taken apart at any stage of installation.

The O-ring will seal against the enclosure face enhancing the I.P. rating of the Plug.

The Breather Drain has an impact resistance of 20 Nm and can operate at temperatures between -50°c to 230°c.

Tested to IP66.

Images shown: Type CTA (top) and Type CTE.

SIRA (0518) 02 ATEX M207
Bureau Veritas BS EN ISO 9001:2008

Thread specification
Isometric (ISO) to BS3643:1981 and ISO 965 Pts 1 & 3
National Pipe Thread (NPT) to ANSI/ASME:1983

EExd breather drain plugsMaterials
Brass: BS2874: 1985 CZ121
Stainless Steel: BS970 PT3 316 S11

ITS 13ATEX17782X
IECEx ITS 13.0018X
GOST TC C-GB.ГБ06.В00105
INMETRO NCC 12.0927X  

Raxton Metallic Drain Plugs are available in a variety of finishes including Nickel, Electro Zinc, Zinc Passivated, Chromatised, Electroless Nickel and Anodised.

Temperature range: -50°C to 230°C

Part numbering system
The Raxton part numbering system document is available as a 39KB PDF document.
Click here to download.